Hyter et al v. Freedom Arms, Inc. et al

IN THE UNITED STATES DISTRICT COURT
FOR THE DISTRICT OF ALASKA
WILLIAM HYTER, et al.,
Plaintiffs,
vs.
FREEDOM ARMS, INC., et al.,
Defendants.
Case No. 3:19-cv-00292-JMK
ORDER RE DEFENDANTS’
MOTION IN LIMINE AND
PARTIES’ CROSS-MOTIONS FOR
SUMMARY JUDGMENT
Defendant Freedom Arms, Inc. (“Freedom Arms”), moved in limine to
preclude Plaintiffs William and Sandra Hyter’s (“Plaintiffs” or “the Hyters”) expert, Jack
Belk, at Docket 63, and for summary judgment on the Hyter’s claims, at Docket 64.
Plaintiffs responded in opposition to summary judgment at Docket 74 and cross-moved for
summary judgment in their favor at Docket 75. All three motions are fully briefed.1 The
Court took the motions under advisement after hearing oral argument on May 31, 2023.
As explained below, the Court GRANTS Freedom Arms’ Motion in Limine,
GRANTS IN PART AND DENIES IN PART Freedom Arms’ Motion for Summary
Judgment, and DENIES Plaintiffs’ Cross-Motion for Summary Judgment.
1 Docket 72; Docket 83; Docket 93; Docket 103; Docket 106.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 1 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 2
I. 	BACKGROUND
The following facts are undisputed unless otherwise noted.
A. 	Freedom Arms Manufactures and Sells a Model 83 Revolver
Defendant Freedom Arms manufactures a Model 83 Revolver (“Model 83”):
a powerful, “single action,” five-shot revolver that fires a .454 Casull cartridge.2 	A
revolver is a type of handgun that incorporates a rotating cylinder.3 	A “single action”
revolver is a revolver that requires the user to manually cock the hammer before firing.4
This contrasts a “double action” revolver, which is designed so that the user can pull the
trigger to cause the hammer to retract and then be released in order to fire.5
The .454 Casull cartridge used with the Model 83 was designed to allow an
individual to defend themselves from large animals, such as bears, using a handgun.6
Accordingly, the cartridge generates significant pressure and recoil when fired, which the
Model 83 is designed to accommodate.7 The forces generated are atypical for a handgun
and are more akin to those generated by high-intensity rifle cartridges.8
The Model 83 incorporates a manual safety, which prevents the weapon from
firing when activated.9 A user activates the safety by drawing back the hammer into the
2 Docket 64-3 at 2.
3 Docket 64-2 at 16:5–8.
4 Id. at 28:6–8, 17–21. 	The gun is fired when the hammer is released from a cocked
position and strikes the firing pin, causing discharge.
5 Id. at 28:12–16.
6 Docket 64-4 at 4.
7 Id.
8 Id.
9 Id.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 2 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 3
“safety bar” or “safety notch” position.10 A “hammer block” is then moved into position
to block the hammer from striking the firing pin and discharging the weapon.11
The Model 83 is sold with a manual included.12 Freedom Arms also makes
this manual available online or by mail or telephone.13 The manual contains warnings and
instructions for the safe use of the Model 8314 and has included similar warnings and
instructions since before 1990.15
Within its first several pages, the manual explains eight different warnings in
bold, capitalized letters.16 	Throughout, the manual repeatedly warns users in bold and
capitalized text to “never handle your Casull revolver with a live cartridge in the cylinder
chamber which is in line with the barrel and firing pin, until you are fully prepared to shoot
at your target” and “[i]n the field never carry the revolver with a live cartridge in the
chamber which is in line with the barrel and firing pin.”17 The manual also includes step-
by-step instructions on how to engage the “hammer block” safety.18
Finally, the manual includes a description of the warranty and a card that an
individual can use to register their firearm.19 	In a section titled “Limited Warranty,” the
manual provides that Freedom Arms “warrants to the original retail purchaser of the
10 Id.
11 Id.; Docket 64-2 at 120:8–14; Docket 64-9.
12 See Docket 64-3 (exemplar manual).
13 Docket 64-2 at 52:6–12.
14 See Docket 64-3.
15 Docket 64-2 at 43:23–44:3.
16 Docket 64-3 at HY-FA-00337–40.
17 Id. at HY-FA-00338–42.
18 Id. at HA-FY-00342.
19 Id. at HA-FY-00349.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 3 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 4
[Model 83], that the firearm purchased shall be free from defects in material and
workmanship under normal use and service” for the applicable warranty period.20 	The
warranty provision then defines “original retail purchaser” as “the person who first
purchased the firearm in a new and unused condition from a retail dealer.”21 Furthermore,
the warranty specifies limits, including that the “written limited warranty is made expressly
in lieu of any other warrants, express or implied, including any implied warranty of
merchantability of fitness for a particular purpose . . . .”22
B. 	Mr. Hyter Purchased a Used Model 83
Plaintiff William Hyter purchased a used Freedom Arms Model 83, Serial
number DF 3668, from the private collection of the owner of the Boondocks Sporting
Goods and Outfitter in Eagle River, Alaska.23 	The manufacturer, Freedom Arms,
originally sold the handgun to Boondocks Sporting Good and Outfitter in March 1990,
shortly after it was manufactured.24 Mr. Hyter chose to purchase a Model 83 in particular
because he wanted a large caliber handgun for bear protection.25 Although the firearm had
been fired prior to Mr. Hyter’s purchase, the seller represented that it was “like new.”26
When Mr. Hyter purchased the Model 83, he did not receive a manual, box, or any other
materials, and the seller did not provide him any information as to the weapon’s function.27
20 Id. at HY-FA-00346.
21 Id.
22 Id. at HY-FA-00348.
23 Docket 63-8 at 75:3–77:9.
24 Dockets 64-10, 64-11.
25 Docket 64-8 at 37:14–16; 54:12–16.
26 Id. at 55:6–8.
27 Id. at 60:18–24, 58:5–7.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 4 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 5
After purchasing the Model 83, Mr. Hyter never sought to obtain a manual
from Freedom Arms or otherwise learn about the newly purchased weapon.28 	However,
he had some prior experience with firearms. 	Now 74 years old, Mr. Hyter started using
firearms around the age of 21 and learned firearm safety by word of mouth while hunting
with others.29 He owns twelve other firearms, although none of them are “single action”
revolvers.30
C. 	Mr. Hyter Suffered Serious Injuries When his Model 83 Discharged After
Falling and Striking a Rock
On June 30, 2018, Mr. Hyter and his son were metal detecting in a rocky
creek bed at Bertha Creek near Turnagain Pass on the Kenai Peninsula.31 Mr. Hyter carried
the Model 83 in a shoulder holster for bear protection.32 All five chambers of the revolver
were loaded with live rounds and Mr. Hyter carried the weapon with its safety disengaged
and the hammer resting directly over a live cartridge.33 	As Mr. Hyter and his son
approached the creek bed, the snap that secured the handgun in Mr. Hyter’s shoulder
holster caught on some brush and came undone.34 	Then, as he was metal detecting,
Mr. Hyter bent over to move a rock in the creek bed, which caused the gun to fall out of
28 Id. at 61:3–5, 72:3–22.
29 Id. at 23:21–22, 29:11–14.
30 Id. at 25:6–9, 26:13–17.
31 Id. at 102:24–104:19, 108:22–23.
32 Id. at 102:24–108:2.
33 Id. at 115:2–4.
34 Id. at 114:7–21.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 5 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 6
the holster.35 The gun fell to the creek bed, struck a rock, and discharged, sending a bullet
into Mr. Hyter’s shoulder.36
D. 	Mr. and Mrs. Hyter File Suit
After his injury, on October 30, 2019, Mr. and Mrs. Hyter filed this action.
In their Complaint, they asserted eight causes of action against the Defendants: (1) strict
liability, (2) failure to warn, (3) breach of implied and actual warranty, (4) failure to
recall/retrofit, (5) violation of consumer protection laws, (6) ultra-hazardous activity,
(7) negligence, and (8) punitive damages.37 Later, Plaintiffs withdrew their cause of action
for “ultra-hazardous activity.”38
II. 	LEGAL STANDARD
A. 	Admissibility of Expert Opinions
A motion in limine is “a procedural mechanism to limit in advance testimony
or evidence in a particular area.”39 	A district court’s power to rule on motions in limine
arises out of its “inherent authority to manage the course of trials.”40 Rulings on motions
in limine are preliminary in nature, as a “district court may change its ruling at trial because
testimony may bring facts to the district court’s attention that it did not anticipate at the
time of its initial ruling.”41
35 Id. at 112:7–10.
36 Id. at 114:2–6, 115:6–116:2.
37 Docket 1-1 at 6–9.
38 Docket 57.
39 United States v. Heller, 551 F.3d 1108, 1111 (9th Cir. 2009).
40 Luce v. United States, 469 U.S. 38, 41 n.4 (1984).
41 United States v. Bensimon, 172 F.3d 1121, 1127 (9th Cir. 1999) (citing id. at 41–42).
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 6 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 7
The party who is the proponent of an expert’s testimony has the burden of
proving its admissibility.42 	The admissibility of expert opinions is controlled by Federal
Rule of Evidence 702, which was modified after Daubert v. Merrell Dow Pharmaceuticals,
Inc.,43 and provides:
A witness who is qualified as an expert by knowledge, skill,
experience, training, or education may testify in the form of an
opinion or otherwise if: 	(a) the expert’s scientific, technical,
or other specialized knowledge will help the trier of fact to
understand the evidence or to determine a fact in issue; (b) the
testimony is based on sufficient facts or data; (c) the testimony
is the product of reliable principles and methods; and (d) the
expert has reliably applied the principles and methods to the
facts of the case.
In Daubert, the Supreme Court articulated a two-step inquiry that a trial
court, acting in its gatekeeping role, must undertake to determine if expert testimony is
admissible.44
“First, the trial court must make a ‘preliminary assessment of whether the
reasoning or methodology underlying the testimony is scientifically valid and of whether
that reasoning or methodology properly can be applied to the facts in issue.’”45 	This
“reliability” analysis is “a flexible one.” 46 Courts may consider several factors, including
“(1) ‘whether a theory or technique can be tested’; (2) ‘whether it has been subjected to
42 Lust By & Through Lust v. Merrell Dow Pharms., Inc., 89 F.3d 594, 598 (9th Cir. 1996).
43 509 U.S. 579, 597 (1993).
44 United States v. Finley, 301 F.3d 1000, 1007–08 (9th Cir. 2002).
45 Id. at 1008 (quoting Daubert, 509 U.S. at 592–93)).
46 Specter v. Texas Turbine Conversions, Inc., 505 F. Supp. 3d 936, 943 (D. Alaska 2020)
(quoting Kumho Tire Co. v. Carmichael, 526 U.S. 137, 150 (1999)) reconsideration denied by
Specter v. Rainbow King Lodge, Inc., No. 3:17-cv-00194-TMB, 2020 WL 7396919 (D. Alaska
Dec. 16, 2020).
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 7 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 8
peer review and publication’; (3) ‘the known or potential error rate of the theory or
technique’; and (4) ‘whether the theory or technique enjoys general acceptance within the
relevant scientific community.’”47 Evidence is unreliable if it is based on “subjective belief
or unsupported speculation.”48
Second, the trial court “must ensure that the proposed expert testimony is
relevant and will serve to aid the trier of fact.”49 “Expert opinion testimony is relevant if
the knowledge underlying it has a valid connection to the pertinent inquiry.”50
Ultimately, “[w]hen an expert meets the threshold established by Rule 702
as explained in Daubert, the expert may testify and the jury decides how much weight to
give that testimony.”51 	“Shaky but admissible evidence is to be attacked by cross
examination, contrary evidence, and attention to the burden of proof, not exclusion.”52
B. 	Summary Judgment
Summary judgment is appropriate where “the movant shows that there is no
genuine dispute as to any material fact and the movant is entitled to judgment as a matter
of law.”53 	A material fact is one that “might affect the outcome of the suit under the
47 Id. (quoting United States v. Hankey, 203 F.3d 1160, 1167 (9th Cir. 2000)).
48 Daubert, 509 U.S. at 590.
49 Finley, 301 F.3d at 1008 (citing Daubert, 509 U.S. at 592–93)).
50 Primiano v. Cook, 598 F.3d 558, 565 (9th Cir. 2010).
51 Id. at 565.
52 Id. at 564.
53 Fed. R. Civ. P. 56(a).
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 8 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 9
governing law.”54 “A genuine issue of material fact exists when the evidence is such that
a reasonable jury could return a verdict for the nonmoving party.”55
The party seeking summary judgment bears the initial burden of establishing
the absence of a genuine issue of material fact.56 	To establish that a fact cannot be
genuinely disputed, the movant can either cite the record or show “that the materials cited
do not establish the . . . presence of a genuine dispute, or that an adverse party cannot
produce admissible evidence to support the fact.”57
Once the movant has made such a showing, the non-movant “bears the
burden of production under [FRCP] 56 to ‘designate specific facts showing that there is a
genuine issue for trial.’”58 	The non-moving party “must do more than simply show that
there is some metaphysical doubt as to the material facts.”59 	A party cannot “defeat
summary judgment with allegations in the complaint, or with unsupported conjecture or
conclusory statements.”60
“If a moving party fails to carry its initial burden of production, the non-
moving party has no obligation to produce anything, even if the nonmoving party would
54 Anderson v. Liberty Lobby, Inc., 477 U.S. 242, 248 (1986).
55 Fortune Dynamic, Inc. v. Victoria’s Secret Stores Brand Mgmt., Inc., 618 F.3d 1025,
1031 (9th Cir. 2010).
56 Celotex Corp. v. Catrett, 477 U.S. 317, 323 (1986).
57 Fed. R. Civ. P. 56(c)(1).
58 Ricci v. DeStefano, 557 U.S. 557, 586 (2009) (quoting Celotex Corp. v. Catrett, 477
U.S. 317, 324 (1986)).
59 Matsushita Elec. Indus. Co., Ltd. v. Zenith Radio Corp., 475 U.S. 574, 586 (1986)
(internal citation omitted); see also Liberty Lobby, 477 U.S. at 252; In re Oracle Corp. Secs. Litig.,
627 F.3d 376, 387 (9th Cir. 2010) (specifying that the non-movant “must show more than the mere
existence of a scintilla of evidence”).
60 Hernandez v. Spacelabs Med. Inc., 343 F.3d 1107, 1112 (9th Cir. 2003).
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 9 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 10
have the ultimate burden of persuasion at trial.”61 	Ultimately, in ruling on a motion for
summary judgment, the Court must view the facts and draw all reasonable inferences in
the light most favorable to the non-moving party.62
“[W]hen parties submit cross-motions for summary judgment, each motion
must be considered on its own merits.”63 The court rules on each motion “on an individual
and separate basis.”64
III. 	DISCUSSION
A. 	Freedom Arm’s Motion in Limine to Preclude Jack Belk
Freedom Arms argues that Mr. Belk’s opinion should be precluded because
he fails to provide a scientific or technical basis for his opinion.65 In particular, Freedom
Arms asserts that Mr. Belk failed to provide a reliable basis for a factfinder to infer that his
proposed design modifications could be incorporated into the Model 83,66 that his opinion
as to causation lacked a reliable methodology and ignored pertinent facts,67 and that he is
not qualified to render an opinion on certain topics.68 	Further, Freedom Arms contends
that Mr. Belk’s opinion should be excluded under Federal Rule of Evidence 403, as its
61 Nissan Fire & Marine Ins. Co. v. Fritz Companies, Inc., 210 F.3d 1099, 1102–03 (9th
Cir. 2000).
62 Scott v. Harris, 550 U.S. 372, 378 (2007).
63 Fair Hous. Council of Riverside Cty., Inc. v. Riverside Two, 249 F.3d 1132, 1136 (9th
Cir. 2001) (citations and quotation omitted).
64 Tulalip Tribes of Wash. v. Washington, 783 F.3d 1151, 1156 (9th Cir. 2015) (quoting
10A Charles Alan Wright, Arthur R. Miller & Mary Kay Kane, Fed. Prac. & Proc. § 2720 (3d ed.
1998)). 65 Docket 63 at 12–15. The Court reviews Mr. Belk’s initial report as it previously struck
Mr. Belk’s supplemental report. Docket 102 (text order).
66 Docket 63 at 12–15.
67 Id. at 16–17.
68 Id. at 18.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 10 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 11
prejudicial impact outweighs its probative value69 and that Mr. Belk should be prevented
from offering an opinion on irrelevant issues.70
Plaintiffs do not directly respond to each argument. 	Instead, in their
opposition, they describe alleged design defects in the Model 83 and insist on the need for
a jury determination in this case. They briefly suggest that one of the design modifications
discussed by Mr. Belk—the transfer bar—could be included in the Model 83 because it is
used in a similar Freedom Arms handgun, the Model 97, and other similar firearms.71 And
they assert in a footnote that Mr. Belk is qualified as an expert because he has provided
expert testimony in other firearms cases, has developed gun patents, and authored a book
about gun design.72
1. 	Mr. 	Belk’s 	opinion 	regarding 	two 	specific 	design 	defects 	is 	not
admissible
Mr. Belk’s expert report identifies 	two alleged design defects 	in the
Model 83: that it does not incorporate a “transfer bar” safety or a “cylinder gap” that allows
a shooter to see whether the weapon is loaded.73 As the party proffering Mr. Belk’s expert
testimony, Plaintiffs bear the burden of proving its admissibility.74
Freedom Arms attacks Mr. Belk’s expert opinion that the Model 83 is
defectively designed because “he has failed to utilize a reliable scientific or technical
69 Id. at 18–19.
70 Id. at 19.
71 Docket 72 at 14, 16–17.
72 Id. at 6 n.7.
73 Docket 63-7 at 7–9.
74 Lust By & Through Lust v. Merrell Dow Pharms., Inc., 89 F.3d 594, 598 (9th Cir. 1996).
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 11 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 12
methodology as a basis” for his opinion.75 	In his expert report and deposition, Mr. Belk
describes the method through which he reached his conclusions as to design defects.76
Mr. Belk viewed the Model 83 that injured Mr. Hyter via Zoom video.77 He also purchased
an exemplar Model 83 and physically examined it.78 Based on his physical examination
and the features of the weapon, he concluded that there are three ways that the firearm
could discharge without a pull of the trigger.79 	As relevant here, he concluded that the
weapon could “drop fire”—that the gun could discharge if it was dropped while the
hammer rested on the firing pin.80
Mr. Belk also discussed alternative designs for the Model 83 that he contends
would eliminate or reduce the risk of the weapon firing without a pull of the trigger.81 He
examined a diagram of another Freedom Arms handgun, Model 97, and concluded that a
“transfer bar” safety could be installed on the Model 83 because it was installed on the
Model 97.82 In his report, Mr. Belk writes,
Examination of a parts diagram for the Model 97 Freedom
Arms indicates it has a transfer bar. 	The transfer bar is
contained in a similar slot in the hammer as the Model 83s [sic]
hammer block safety and operates by action of the trigger in
much the same as the manual ‘safety notch’ found in the
Model 83. While dimensions and possibly minor details would
be different, installing the Model 97 safety system into the
75 Docket 63 at 12.
76 Docket 63-7; Docket 63-2.
77 Docket 63-7 at 1.
78 Id. at 2–5.
79 Id. at 5.
80 Id.
81 Id. at 6–9.
82 Id. at 7.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 12 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 13
Model 83 would make it as safe as other newly made single-
action revolvers and safer than the present Model 83.83
He then concludes that “[i]t is practical and economically feasible to fit a similar trigger
transfer bar safety into the Model 83” and that “[c]hanging the Model 83 to function as a
Model 97 would make it a safer gun without sacrificing any of the inherent good features
of the Model 83.”84
Additionally, Mr. Belk suggested that the Model 83 should include a
“cylinder gap” and noted that “other companies have adopted the ‘rim space’ cylinder
because cartridge [sic] (rims) can be seen by the shooter without having to look into the
front of the cylinder to assure [sic] it’s loaded . . . .”85
Mr. Belk’s conclusions that the Model 83 bears these two design defects must
be precluded. The reliability prong of the Daubert inquiry requires trial courts to examine
the methodology an expert uses in reaching a conclusion.86 Although “experts commonly
extrapolate from existing data,” “nothing in either Daubert or the Federal Rules of
Evidence requires a district court to admit opinion evidence that is connected to existing
data only by the ipse dixit of the expert.”87 “A court may conclude that there is simply too
great an analytical gap between the data and the opinion proffered.”88 For example, another
federal district court concluded that an expert’s opinion as to a design defect failed to pass
83 Id.
84 Id. at 7, 9.
85 Id. at 9.
86 Daubert, 509 U.S. at 595 (“The focus, of course, must be solely on principles and
methodology, not on the conclusions that they generate.”).
87 Gen. Elec. Co. v. Joiner, 522 U.S. 136, 146 (1997).
88 Id.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 13 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 14
muster under Daubert for a lack of an identifiable methodology where an expert concluded,
without more, that one toaster oven was defective because it did not include a feature that
other toaster ovens did.89
Here, Mr. Belk concludes that a “transfer bar” safety system incorporated
into one Freedom Arms handgun could be feasibly and safely used on the Model 83. But,
other than identifying that both firearms are structured similarly, he does not analyze why
and how the safety system for one should be incorporated into the other. 	Accordingly,
there is “too great an analytical gap between” the existence of another firearm with a
transfer bar safety system and Mr. Belk’s conclusion that the same system could be
incorporated into the Model 83.90 	Additionally, this absence of analysis means that the
Court simply cannot undertake the requisite “preliminary assessment of whether the
reasoning or methodology underlying the testimony is scientifically valid.”91
Mr. Belk’s opinion as to the lack of a “cylinder gap” suffers the same defect.
Without more, the fact that a feature exists on one firearm does not support that the lack of
its inclusion in another firearm constitutes a defect in the weapon’s design.
Moreover, as Defendants point out, Mr. Belk’s opinion that the Model 83 is
defectively designed because it lacks a “cylinder gap” is not admissible, as it is not
relevant.92 Whether the weapon should have incorporated a “cylinder gap” so that a user
could safely visually confirm that the weapon was loaded will not “aid the trier of fact” in
89 See Booth v. Black & Decker, Inc., 166 F. Supp. 2d 215, 221 (E.D. Pa. 2001).
90 Id.
91 Daubert, 509 U.S. at 592–93.
92 Docket 63 at 19–20.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 14 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 15
this case.93 The issue is of no consequence in determining the action, as Mr. Hyter admits
that he knew that the gun was loaded prior to his injuries.94 	Therefore, Plaintiffs have
failed to carry their burden of proving the admissibility of Mr. Belk’s testimony as to these
design defects.
2. 	Plaintiffs have not carried their burden of showing Mr. Belk’s causation
opinion is admissible
Next, Defendants argue that Mr. Belk should be precluded from testifying
that any alleged defect caused Mr. Hyter’s injury because he did not use any methodology
to evaluate causation.95
It is not true that Mr. Belk did not use any methodology to evaluate causation
in this case. 	His report and testimony at the Court’s Daubert hearing make clear that he
examined an exemplar Model 83, viewed the subject Model 83 in photos and via Zoom,
reviewed a factual narrative of the incident, and drew conclusions about what occurred
based on his experience working with firearms and the features of the Model 83.96
Although Mr. Belk did use some methodology to evaluate causation in this
case, his opinion must be excluded. 	Under Daubert, the court acts as a gatekeeper and
“ensure[s] that any and all scientific testimony or evidence admitted is not only relevant,
but reliable.”97 	Ultimately, it is the party seeking to admit an expert’s testimony that bears
93 United States v. Finley, 301 F.3d 1000, 1008 (9th Cir. 2002) (citing Daubert, 509 U.S.
at 592–93)).
94 Docket 63-8 at 65:9–15.
95 Docket 63 at 16–17.
96 See Docket 63-7.
97 Daubert, 509 U.S. at 589.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 15 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 16
the burden of proving its admissibility.98 Plaintiffs fail to do so here. Although the Court
can understand the methodology Mr. Belk uses to arrive at his conclusion as to causation
– inferring from the features of the firearm and the facts based on his technical experience
– Plaintiffs have not demonstrated that this is a reliable methodology that may be presented
to a jury. Their assertion that Mr. Belk has been qualified as an expert in other cases does
not speak to the reliability of the opinions he offers in this matter.
3. 	The Court declines to preclude an opinion as to the adequacy of
warnings that has not been proffered
Defendants argue that Mr. Belk should be precluded from offering an opinion
as to the adequacy of warnings accompanying the Model 83 revolver because he is not
qualified to opine on the issue.99
A witness may be “qualified as an expert by knowledge, skill, experience,
training, or education . . . .”100 	The Rule “contemplates a broad conception of expert
qualifications” and “is broadly phrased and intended to embrace more than a narrow
definition of qualified expert.”101
Mr. Belk disclaims that he offers such an opinion in this matter and a review
of his expert report yields no indication that he intends to do so.102 The Court declines to
prospectively preclude an opinion that has not been offered. 	Should Mr. Belk seek to
testify to the adequacy of warnings at trial, Defendants may raise an objection.
98 Lust By & Through Lust, 89 F.3d at 598.
99 Docket 63 at 18.
100 Fed. R. Evid. 702.
101 Thomas v. Newton Int’l Enterprises, 42 F.3d 1266, 1269 (9th Cir. 1994).
102 Docket 63-2 at 12:7–22; see generally Docket 63-7.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 16 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 17
4. 	Mr. Belk may not testify about the Model 83 lack of “cylinder gap” or
ways in which the Model 83 can discharge without a trigger pull
Additionally, Defendants contend that Mr. Belk has disclosed multiple
opinions that are not relevant and should be precluded from testifying as to those
subjects.103 In particular, they argue that Mr. Belk’s opinions as to the lack of a “cylinder
gap” and the possibility of the Model 83 firing without a trigger pull are irrelevant.104
Above, 	the 	Court 	determined 	that 	Mr. 	Belk’s 	opinion 	regarding 	the
Model 83’s lack of a “cylinder gap” is irrelevant and that his opinion with respect to
causation—including how a “drop fire” could have caused Mr. Hyter’s injuries—has not
been proven reliable. With respect to Mr. Belk’s opinion that it is possible for the Model 83
to fire without a trigger pull, the Court agrees that Mr. Belk’s opinion that the Model 83
can fire if it is impacted when held or if the hammer is snapped back and released are not
relevant in this action. There is no dispute that Mr. Hyter’s Model 83 discharged when it
was dropped and struck a rock. 	Thus, Mr. Belk’s opinion that the Model 83 has the
potential to “drop fire” is relevant. 	However, his opinions regarding the other ways in
which the Model 83 could fire without a trigger pull are not relevant.
5. 	The Court declines to further limit Mr. Belk’s opinion on Rule 403
grounds
Finally, Defendants assert that Mr. Belk’s opinions should be excluded under
Federal Rule of Evidence 403 as they are unfairly prejudicial, risk confusing the issues,
103 Docket 63 at 19–20.
104 Id.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 17 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 18
and may mislead a jury.105 	They argue that Mr. Belk’s unsupported opinions will invite
the jury to speculate and improperly analyze the issues.106 Having substantially narrowed
what opinions Mr. Belk may offer, the Court declines, at this time, to further restrict
Mr. Belk’s testimony on Rule 403 grounds. Of course, Defendants are free to reassert any
Rule 403 objections they deem warranted during Mr. Belk’s trial testimony.
B. 	Freedom Arm’s Motion for Summary Judgment
Freedom Arms asserts that summary judgment dismissing each of Plaintiffs’
claims is appropriate. In brief, it argues that Plaintiffs fail to produce evidence establishing
their claims or that the claims fail as a matter of law. 	Plaintiffs insist that disputes of
material fact exist, and summary judgment is not appropriate.
The Court examines each of the claims in turn.
1. 	Plaintiffs’ strict liability and failure to warn claims
Freedom Arms argues that Plaintiffs’ claim that they are strictly liable for
Mr. Hyter’s injuries should be dismissed because Plaintiffs have not produced evidence
sufficient to support a finding that the Model 83 was defective or that Freedom Arms failed
to warn about risks associated with the weapon.107
A manufacturer “is strictly liable in tort when an article he places on the
market, knowing that it is to be used without inspection for defects, proves to have a defect
105 Id. at 18–19.
106 Id.
107 Docket 64 at 16–24.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 18 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 19
that causes injury to a human being.”108 	“A product may be defective because of a
manufacturing defect, a defective design, or a failure to contain adequate warnings.”109
The Court considers together Plaintiff’s first count, strict liability, and their second count,
failure to warn.
First, Freedom Arms argues, and Plaintiffs concede, that there is no evidence
of a manufacturing defect in this case.110 Accordingly, to the extent that Plaintiffs claim
that Freedom Arms is strictly liable due to a manufacturing defect, that claim fails.
Second, Freedom Arms argues that Plaintiffs cannot establish the Model 83
was defectively designed under either consumer expectations or risk utility tests because
they have produced no admissible expert evidence in support of their design defect claim
and because Mr. Hyter’s use of the Model 83 was not reasonably foreseeable.111 Plaintiffs
respond that summary judgment is not appropriate under either test.112 Plaintiffs assert that
they have produced evidence which establishes a claim for design defect.113 	Plaintiffs
argue that the evidence that the handgun could discharge without a trigger pull and that it
does not incorporate a “transfer bar” safety system creates a dispute of material fact.114
108 Clary v. Fifth Avenue Chrysler Centers, Inc., 454 P.2d 244, 247 (Alaska 1969) (quoting
Greenman v. Yuba Power Products, Inc., 377 P.2d 897, 900 (Cal. 1962)).
109 Shanks v. Upjohn Co., 835 P.2d 1189, 1194 (Alaska 1992).
110 Docket 64 at 17–18; Docket 74 at 7.
111 Docket 64 at 18–21.
112 Docket 72 at 18–19.
113 Docket 74 at 7–9.
114 Id. at 2–3.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 19 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 20
Under Alaska law, courts apply a two-pronged test for finding a defect in
design cases.115 	“[T]he factfinder can find a product defective either if the plaintiff
demonstrates that the product failed to perform as safely as an ordinary consumer would
expect when used in an intended or reasonably foreseeable manner [consumer expectation
test] . . . or if the plaintiff proves that the product’s design proximately caused his injury
and the defendant fails to prove . . . that on balance the benefits of the challenged design
outweighed the risk of danger inherent in such design [risk utility test].”116
The Alaska Supreme Court noted that it adopted the consumer expectations
test in Caterpillar Tractor Company v. Beck partially because it “incorporates notions of
the implied warranty of fitness for reasonable use” which requires that goods “be fit for the
ordinary purposes for which the goods are used.”117 	Accordingly, the test requires a
factfinder to determine whether the product is “unfit for ordinary use.”118 	At summary
judgment, the Court only evaluates whether the plaintiff has adduced enough evidence that
a material fact exists as to consumer expectations and a jury could permissibly come to the
conclusion that the product at issue is unfit for ordinary use.
Plaintiffs have met that bar in this case. The Court has precluded Mr. Belk
from testifying as to his conclusions that the Model 83 was defective because it failed to
include certain design elements and that a defect caused Mr. Hyter’s injury. 	However, a
115 Gen. Motors Corp. v. Farnsworth, 965 P.2d 1209, 1220 (Alaska 1998) (citing
Caterpillar Tractor Co. v. Beck, 593 P.2d 871 (Alaska 1979)).
116 Id.
117 Id. at 1221 (internal quotations and citations omitted).
118 Id.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 20 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 21
genuine dispute exists to whether the Model 83 has the potential to “drop fire” and whether
that possibility constitutes a design defect under the consumer expectations test.
The absence of expert testimony regarding defect and causation does not
doom this claim. Expert testimony is not required to satisfy the consumer expectations test
for a design defect.119 In fact, “[t]he consumer expectation test disfavors expert testimony,
and asks instead whether a layperson’s common experience would indicate that the product
was defective.”120 	Therefore, Plaintiffs may proceed without expert evidence and a jury
could permissibly conclude that a handgun that discharges without a pull of the trigger
when dropped is unfit for ordinary use or that the product failed to perform as safely as an
ordinary consumer would expect.
Freedom Arms argues that Plaintiffs fail the consumer expectations test
because Mr. Hyter did not use the Model 83 in a reasonably foreseeable manner.121 In their
view, had he read the manual, Mr. Hyter would not have carried the weapon with the
hammer down behind a live round, and he would have used the manual safety.122 Plaintiffs
119 See Massok v. Keller Indus., Inc., 147 F. App’x 651, 660 (9th Cir. 2005) (“[U]nder
Soule, no expert testimony is required to proceed under the consumer expectations test and
Campbell instructs that a plaintiff may reach a jury on nothing more than his own testimony and
evidence of the “objective conditions of the product.”); Gen. Motors Corp. v. Farnsworth, 965
P.2d 1209, 1221 (Alaska 1998) (adopting California’s approach to the consumer expectations test
as described in Soule v. General Motors Corp., 882 P.2d 298, 310 (Cal. 1994)).
120 In re Crash of Aircraft N93PC on July 7, 2013, at Soldotna, Alaska, No. 3:15-cv-0112-
HRH, 2021 WL 2641206, at *1 (D. Alaska June 25, 2021) (internal quotations and citations
omitted).
121 Docket 64 at 18.
122 Id.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 21 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 22
respond that a “normal Alaskan” using the weapon for bear protection would carry the
weapon in the same way Mr. Hyter did.123
Freedom Arms has failed to establish that no genuine issue of facts exists as
to whether Mr. Hyter’s use was reasonably foreseeable. That the manual warns users not
to use a product in a particular way does not, in and of itself, indicate that such use is not
foreseeable. 	Mr. Hyter’s deposition also indicates that an individual carrying a handgun
for bear protection might foreseeably carry the Model 83 in a similar way to be prepared
to confront large animals.124
Ultimately, Plaintiffs’ strict liability claim survives summary judgment and
may be presented to the jury because genuine issues of fact exist as to whether the Model 83
is defective under the consumer expectations test because it can “drop fire,” and whether
Mr. Hyter’s use of the handgun was reasonably foreseeable.
However, Plaintiffs may not present a case based on a risk-utility. Plaintiffs
argue that a “passive safety” such as a “transfer bar” would eliminate the risk of accidental
discharge and still provide use benefits.125 	But they do not cite admissible supporting
evidence.
Freedom Arms argues that “on balance the benefits of the challenged design
outweighed the risk of danger inherent in such design” because the Model 83 is designed
to accommodate the use of a high-pressure cartridge so that users can use the weapon for
123 Docket 74 at 8.
124 Docket 64-8 at 65:9–20.
125 Docket 72 at 19–20.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 22 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 23
defense against large game.126 Freedom Arms produces evidence that there are benefits of
this design—that users can effectively use the weapon for protection against large game—
and risks associated with a “passive safety” like a “transfer bar” as such a mechanism may
fail in a way that leaves users unaware.127 Moreover, given the Court’s evidentiary rulings,
Plaintiffs cannot show that a design defect, such as the failure to include a passive safety,
proximately caused their injuries, which is required under the risk-utility test. 	As such,
Freedom Arms’ evidence that the benefits of the design of its Model 83 outweighs any
inherent risks goes unchallenged and summary judgment dismissing a strict liability claim
on a risk-utility theory is appropriate.
Third, Freedom Arms asserts that Plaintiffs failed to produce evidence that
supports a claim for failure to warn.128 	Plaintiffs respond that Freedom Arms’ warnings
were not directed at the individuals who purchased the Model 83 in secondary markets.129
Under a failure to warn theory of liability, a product is defective if it poses a
risk of injury when used in a reasonably foreseeable manner but is marketed without
adequate warnings of that risk.130 “If such a defect is the proximate cause of the plaintiff’s
injuries, the manufacturer is strictly liable unless the defendant manufacturer can prove
that the risk was scientifically unknowable at the time the product was distributed to the
plaintiff.”131 	A warning is adequate if it “1) clearly indicate[s] the scope of the risk or
126 Docket 64 at 19.
127 Docket 64-2 at 53:4–21, 152:3–7, 153:14–18; Docket 64-4 at 4–5.
128 Docket 64 at 21–24.
129 Docket 72 at 19–20.
130 Shanks, 835 P.2d at 1199–1200.
131 Id.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 23 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 24
danger posed by the product; 2) reasonably communicate[s] the extent or seriousness of
harm that could result from the risk or danger; and 3) [is] conveyed in such a manner as to
alert the reasonably prudent person.”132
In this case, Freedom Arms’ warnings were adequate. 	In its manual,
Freedom Arms repeatedly warns users in bold and capitalized text to “never handle your
Casull revolver with a live cartridge in the cylinder chamber which is in line with the barrel
and firing pin, until you are fully prepared to shoot at your target” and “[i]n the field never
carry the revolver with a live cartridge in the chamber which is in line with the barrel and
firing pin.”133 	It further warns in capitalized letters that users “should never totally rely
upon any mechanical safety device” and that “the revolver will fire if it is dropped or if the
hammer is otherwise struck with sufficient force.”134 These warnings both clearly indicate
the scope of risk and the extent or seriousness of the danger—that the handgun could fire
a live round without a trigger pull. And they are conveyed in such a manner as to alert a
reasonably prudent person. 	They are bold, capitalized, and repeated throughout the
manual. And the manual is available online or will be shipped by the manufacturer at no
cost after a call or letter.135 	A reasonably prudent person who purchased a handgun
specifically designed to be even more deadly than a typical handgun would do some
research or seek out a manual so that they could safely operate it. Plaintiffs cannot establish
a genuine dispute of material fact as to Freedom Arms’ failure to warn.
132 Id. at 1200.
133 Docket 64-3 at HY-FA-00338–42, HY-FA-00344–5.
134 Id. at HY-FA-00339–40.
135 Docket 64-2 at 52:6–12.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 24 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 25
In any case, Mr. Hyter has not shown his injuries were proximately caused
by a lack of warning. 	Freedom Arms produces evidence that Mr. Hyter did not read the
Model 83 manual, which was readily available to individuals who purchased the gun in
secondary markets, and did not otherwise seek out information on the weapon.136 It follows
that Mr. Hyer’s injuries are not causally related to the adequacy of warnings because he
did not read or rely on those warnings. Mr. Hyter’s injury would have occurred regardless
of the adequacy of the warnings Freedom Arms issued.
Accordingly, Plaintiffs’ Count I for strict liability may proceed on a
consumer expectations theory. Summary judgment is warranted as to a strict liability claim
under a risk-utility theory and as to Plaintiffs’ Count II for failure to warn.
2. 	Plaintiffs’ breach of warranties claim
Freedom Arms next argues that Plaintiffs’ breach of warranty claim should
be dismissed because the company made no representations or warranties to Mr. Hyter that
could support such a claim.137 	It further argues that, in the alternative, it disclaimed or
limited any express or implied warranties.138 	Plaintiffs respond, without citation, that
public policy precludes a party from contracting away implied warranties.139
Under Alaska statute, a seller can create an express warranty in three ways,
by “(1) an affirmation of fact or promise made by the seller to the buyer that relates to the
goods and becomes part of the basis of the bargain creates an express warranty that the
136 Docket 64-8 at 60:18–24, 58:5–7, 61:3–5, 72:3–22.
137 Docket 64 at 25.
138 Id.
139 Docket 74 at 10–11.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 25 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 26
goods shall conform to the affirmation or promise; (2) a description of the goods that is
made part of the basis of the bargain creates an express warranty that the goods shall
conform to the description; [or] (3) a sample or model that is made part of the basis of the
bargain creates an express warranty that the whole of the goods shall conform to the sample
or model.”140
Here, Freedom Arms never communicated with Mr. Hyter, who bought the
Model 83 from the private collection of a gun store owner.141 	Therefore, it made no
“affirmation of fact or promise” to Mr. Hyter and did not provide him “a description of the
goods” or a “sample or model.” It never created an express warranty as to the Model 83.
Mr. Hyter’s breach of warranty claim thus fails insofar as it is based on an express warranty.
Furthermore, even assuming Freedom Arms created an express warranty,
that warranty would have expired long ago as it was explicitly limited to one year after
purchase.142 	Evidence shows that Mr. Hyter purchased the Model 83 well over 30 years
prior to the incident.143
Plaintiffs’ claim for breach of implied warranty also fails. 	A manufacturer
may exclude or modify the implied warranties of merchantability and fitness by a
conspicuous writing.144 	Therefore, no implied warranty existed here, as Freedom Arms
conspicuously modified all implied warranties in its readily-available manual. 	In the
140 Alaska Stat. § 45.02.313(a).
141 Docket 64-8 at 49:3–6.
142 Docket 64-3 at HY-FA-00348.
143 Docket 64-8 at 52:4–13.
144 Alaska Stat. § 45.02.316(b).
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 26 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 27
manual’s limited warranty provision, Freedom Arms provided that its “written limited
warranty is made expressly in lieu of any other warrants, express or implied, including any
implied warranty of merchantability of fitness for a particular purpose . . . .”145
Summary 	judgment 	as 	to 	Plaintiffs’ 	claim 	for 	breach 	of 	warrant 	is
appropriate. Plaintiffs’ Count III is DISMISSED.
3. 	Plaintiffs’ claim for failure to recall or retrofit
Freedom Arms asserts that summary judgment dismissing Plaintiffs’ claim
for failure to recall or retrofit is appropriate as Alaska courts do not recognize a duty to
recall.146 Plaintiffs respond that Alaska law is clear that manufacturers have “a post-sale
duty to inform consumers of its products of dangers that became apparent after sale when
the danger is potentially life-threatening.”147 Furthermore, they argue that Freedom Arms
had a pre-sale duty to include state-of-the-art technological developments to prevent injury.
Summary judgment in favor of Freedom Arms is appropriate as to Plaintiffs’
claim for failure to recall or retrofit. There is no duty for a manufacturer to recall a product
under Alaska law.148 And, although a post-sale duty to warn exists under Alaska law, it is
a separate cause of action, which the Plaintiffs have not alleged.149 	Finally, the pre-sale
duty to include state-of-the-art technological developments to which Plaintiffs refer, is
merely a rephrasing of a strict liability claim for design defect, which the Court has
145 Docket 64-3 at HY-FA-00348.
146 Docket 64 at 28.
147 Docket 74 at 11–12; Jones v. Bowie Indus., Inc., 282 P.3d 316, 334 (Alaska 2012).
148 Jones v. Bowie Indus., Inc., 282 P.3d 316, 335 n.70 (Alaska 2012).
149 Blake v. Guthy-Renker, LLC, 965 F. Supp. 2d 1076, 1085 (D. Alaska 2013); Docket 1.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 27 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 28
addressed above. 	Accordingly, Plaintiffs’ Count IV, their claim for failure to recall or
retrofit, is DISMISSED.
4. 	Plaintiffs’ claim under federal and state consumer protection laws
Freedom Arms contends that Plaintiffs’ claim that it violated federal and state
consumer protection laws fails because Plaintiffs have not identified any laws which
Freedom Arms violated and the record does not support the existence of any unfair
conduct.150 	In their opposition, Plaintiffs indicate they wish to withdraw this claim.151
Summary judgment as to this claim therefore is warranted. 	Plaintiffs’ Count V, their
consumer protection claim, is DISMISSED.
5. 	Plaintiffs’ ultrahazardous activity claim
Plaintiffs have withdrawn their ultrahazardous activity claim.152 	Summary
judgment as to this claim therefore is warranted. Plaintiffs’ Count VI, their ultra-hazardous
activity claim, is DISMISSED.
6. 	Plaintiffs’ negligence claim
Freedom Arms argues that summary judgment disposing of Plaintiffs’
negligence claim is appropriate. First, it contends that there can be no negligence when a
manufacturer is selling a non-defective product, and the Model 83 is not defective.153
Second, they argue that they owed no duty to Mr. Hyter because his use of the Model 83
150 Docket 64 at 28–29.
151 Docket 74 at 12.
152 Docket 57.
153 Docket 64 at 29.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 28 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 29
was not foreseeable.154 	And, third, they point out that Plaintiffs have not provided any
expert testimony that indicates the standard of care required of a firearms manufacturer.155
Plaintiffs do not directly respond.
Plaintiffs’ negligence claim fails because they have not produced expert
testimony related to the standard of care in this case. Expert testimony that establishes the
standard of care “is not a general requirement of all professional negligence actions,
especially in non-technical situations where negligence is evident to lay people.”156
However, this case does not fall into that category. Determining the standard of care that
applies to a manufacturer of firearms is inherently technical and beyond the ken of the
average juror. Summary judgment is appropriate as to Plaintiffs’ negligence claim, as their
expert’s report does not purport to establish a standard of care. Plaintiffs’ Count VII, their
negligence claim, is DISMISSED.
7. 	Punitive damages
Finally, Freedom Arms argues that Plaintiffs may not seek punitive damages
because they have not produced any evidence that it acted with malice.157 	Plaintiffs
respond that the existence of other cases relating to product defects that are like those
alleged here put Freedom Arms on notice of the defect in the Model 83, and its refusal to
modify its design represents reckless indifference.158
154 Id. at 30.
155 Id.
156 Johnson & Higgins of Alaska Inc. v. Blomfield, 907 P.2d 1371, 1374 (Alaska 1995)
(internal citations and quotations omitted).
157 Docket 64 at 30–31.
158 Docket 74 at 13–14.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 29 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 30
To recover punitive damages, “the plaintiff must prove by clear and
convincing evidence that the defendant’s conduct was outrageous, such as acts done with
malice, bad motives, or reckless indifference to the interests of another.”159 	Punitive
damages “are a harsh remedy not favored in law.”160 “[W]here there is no evidence that
gives rise to an inference of actual malice or conduct sufficiently outrageous to be deemed
equivalent to actual malice, the trial court need not, and indeed should not, submit the issue
of punitive damages to the jury.”161
Plaintiffs 	have 	not 	produced 	evidence 	that 	meets 	this 	high 	standard.
Plaintiffs argue that Freedom Arms was on notice that the Model 83 could discharge
without a trigger pull and its failure to incorporate a passive safety shows reckless
indifference to the potential that users could be injured. 	But the record shows the
handgun’s “hammer block” manual safety would have reduced the chance of this type of
discharge if it had been engaged.162 	And Plaintiffs have produced no evidence that the
manufacturer’s choice of one safety over another was made in bad faith, especially given
the absence of expert testimony that indicates the passive safety which Plaintiffs contend
Freedom Arms recklessly failed to incorporate could function on the Model 83. There is
therefore an absence of dispute of fact as to whether Freedom Arms’ failure to incorporate
159 Robles v. Shoreside Petroleum, Inc., 29 P.3d 838, 846 (Alaska 2001).
160 Chizmar v. Mackie, 896 P.2d 196, 210 (Alaska 1995).
161 State Farm Mut. Auto. Ins. Co. v. Weiford, 831 P.2d 1264, 1266 (Alaska 1992) (internal
citations and quotations omitted).
162 Docket 64-2 at 55:2–7.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 30 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 31
a “transfer bar” safety was recklessly indifferent to the interests of others, and punitive
damages are inappropriate. Plaintiffs may not seek punitive damages.
In sum, and in accordance with the Court’s reasoning herein, Freedom Arms’
Motion for Summary Judgment is GRANTED IN PART and DENIED IN PART.
Plaintiffs’ strict liability claim remains.
C. 	Plaintiffs’ Cross-Motion for Summary Judgment
Plaintiffs cross-move for summary judgment in their favor, arguing that a
final judgment in a case against Freedom Arms in Ohio dictates the outcome of their design
defect claim.163 	Additionally, they argue that summary judgment in their favor is
warranted with respect to their failure to retrofit or recall claim, breach of warranties claim,
the issue of causation, their negligence claim, their strict liability claim, and the issue of
punitive damages. 	Freedom Arms responds that Plaintiffs misstate and misapply the
doctrines of claim and issue preclusion.164 As explained below, Plaintiffs’ Cross-Motion
is DENIED in its entirety.
1. 	Issue preclusion does not dictate the outcome of Plaintiffs’ design defect
claim
First, Plaintiffs argue that collateral estoppel (issue preclusion) determines
the issue of product defect in this case.165 	Freedom Arms respond that issue preclusion
163 Docket 75.
164 Docket 103 at 12.
165 Docket 75 at 11–14.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 31 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 32
does not apply because Ohio law regarding issue preclusion applies and requires mutuality
of parties.166
Issue preclusion “precludes relitigation of an issue already litigated and
determined in a previous proceeding between the same parties.”167 “[F]ederal courts must
give state court judgments the preclusive effect that those judgments would enjoy under
the law of the state in which the judgment was rendered.”168 In this case, Plaintiffs ask the
Court to give preclusive effect to a judgment issued in an Ohio court.169 	Therefore, the
Court applies Ohio law.
Under Ohio law, a party seeking to apply issue preclusion offensively must
demonstrate mutuality of parties, or that all the parties to the present proceeding were
bound by the prior judgment.170 The Court in Goodson was crystal clear that mutuality is
required for issue preclusion “in actions involving issues of design negligence or defective
design of mass-produced products particularly when the former adjudication of the issues
arose out of a separate underlying incident.”171
Plaintiffs seek to apply issue preclusion offensively against Freedom Arms
and thus must demonstrate mutuality. 	They cannot do so as the judgment in Taylor v.
Freedom Arms arose out of a separate underlying incident involving a different plaintiff.
166 Docket 103 at 14–17.
167 Pike v. Hester, 891 F.3d 1131, 1138 (9th Cir. 2018).
168 Far Out Prods., Inc. v. Oskar, 247 F.3d 986, 993 (9th Cir. 2001) (citing 28 U.S.C.
§ 1738).
169 Docket 75 at 11 (asking the court give preclusive effect to Taylor v. Freedom Arms,
Inc., 2009-Ohio-6091, 2009 WL 3863123 (Ohio Ct. of App. 2009)).
170 Goodson v. McDonough Power Equip., Inc., 443 N.E.2d 978, 987 (Ohio 1983).
171 Id.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 32 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 33
2. 	Claim preclusion does not determine Plaintiffs’ design defect claim
Plaintiffs also assert that the doctrine of res judicata (claim preclusion)
determines their design defect claim.172 Freedom Arms responds that claim preclusion is
inapplicable because the case Plaintiffs assert has preclusive effect did not arise out of the
same nucleus of facts as this case.173
“Res judicata, or claim preclusion, prohibits lawsuits on any claims that were
raised or could have been raised in a prior action.”174 “Res judicata applies when there is:
(1) an identity of claims; (2) a final judgment on the merits; and (3) identity or privity
between parties.”175 “The central criterion in determining whether there is an identity of
claims between the first and second adjudications is whether the two suits arise out of the
same transactional nucleus of facts.”176
Claim preclusion does not apply as the claims in this matter do not arise from
the same nucleus of facts as those in Taylor v. Freedom Arms and could not have been
raised in that action. 	In Taylor, the plaintiff sued Freedom Arms after his Model 83
discharged when, during the process of removing a heavy coat, material caught the
revolvers hammer, partially drawing it back and releasing it.177 This case arises from an
entirely separate and unrelated incident.
172 Docket 75 at 11–14.
173 Docket 103 at 13–14.
174 Stewart v. U.S. Bancorp, 297 F.3d 953, 956 (9th Cir. 2002) (internal quotations and
alterations omitted).
175 Id. (internal quotations and alterations omitted).
176 Frank v. United Airlines, Inc., 216 F.3d 845, 851 (9th Cir. 2000) (internal citation and
quotations omitted).
177 Docket 103-1 at 4; Docket 103-3 at ¶ 8.
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 33 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 34
3. 	Plaintiffs are not entitled to summary judgment on their duty to retrofit
or recall claim
Plaintiffs argue that “summary judgment must be granted on their failure to
recall, retrofit, or warn cause of action.”178 	However, as the Court discussed, no duty to
retrofit or recall exists under Alaska law, and a post-sale duty to warn claim constitutes a
separate claim which the Plaintiffs did not plead or seek to amend their complaint to
include. As a matter of law, Plaintiffs are not entitled to summary judgment on this claim.
4. 	Plaintiffs are not entitled to summary judgment on the issues of breach
of warranties, causation, comparative fault, strict liability, negligence,
or punitive damages
Plaintiffs also argue that summary judgment should be granted in their favor
on these issues.179
With respect to each issue, they fail to cite or reference specific evidence in
the record in support of their contentions, which are framed in conclusory terms.
Therefore, Plaintiffs simply do not meet their burden under Federal Rule of Civil
Procedure 56 of establishing an absence of genuine dispute of material fact by citing to the
record or showing the materials cited do not establish a genuine dispute.180 	The Court
cannot determine whether an absence of material fact exists because Plaintiffs fail to cite
any factual material, or absence thereof, in the record from which a conclusion may be
drawn. Accordingly, summary judgment is denied as to these issues.
178 Docket 75 at 14.
179 Id. at 15–25.
180 Fed. R. Civ. P. 56(c)(1).
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 34 of 35

Hyter, et al. v. Freedom Arms, Inc., et al. 	Case No. 3:19-cv-00292-JMK
Order re Defendants’ Motion in Limine and Parties’ Cross-Motions for Summary Judgment 	Page 35
IV. 	CONCLUSION
Freedom Arm’s Motion in Limine is GRANTED. 	Freedom Arm’s Motion
for Summary Judgment is GRANTED IN PART AND DENIED IN PART. Plaintiffs’
Cross-Motion for Summary Judgment is DENIED.
IT IS SO ORDERED this 22nd day of November, 2023, at Anchorage,
Alaska.
/s/ Joshua M. Kindred
JOSHUA M. KINDRED
United States District Judge
Case 3:19-cv-00292-JMK Document 116 Filed 11/22/23 Page 35 of 35