n-07-46.pdf

Preserve advance releases and the authoritative Internal Revenue Bulletin rendition; directory timestamps are file-publication metadata, not legal effective dates. HTML bulletins begin June 2003; earlier available issues require full PDF parsing.

This collection currently includes the publisher’s available advance-release directory. Historical bulletin renditions are discovered separately; an advance-release record alone does not certify the collection archive complete.

Part III – Administrative, Procedural, and Miscellaneous

Credit for New Qualified Heavy-Duty Hybrid Motor Vehicles

Notice 2007- 46

SECTION 1. PURPOSE

This notice sets forth interim guidance, pending the issuance of
regulations, relating to the new qualified hybrid motor vehicle credit under
§ 30B(a)(3) and (d) of the Internal Revenue Code. Specifically, this notice
provides procedures for a vehicle manufacturer (or, in the case of a foreign
vehicle manufacturer, its domestic distributor) to certify to the Internal Revenue
Service (Service) both:
(1) that a heavy-duty vehicle of a particular make, model, and model year
meets certain requirements that must be satisfied to claim the new qualified
hybrid motor vehicle credit under § 30B(a)(3) and (d); and
(2) the amount of the credit allowable with respect to that vehicle.
This notice also provides guidance to taxpayers who purchase qualified vehicles
regarding the conditions under which they may rely on the vehicle manufacturer’s
(or, in the case of a foreign vehicle manufacturer, its domestic distributor’s)
certification in determining whether a credit is allowable with respect to the
vehicle and the amount of the credit. The Service and the Treasury Department
expect that the regulations will incorporate the rules set forth in this notice.

2
SECTION 2. BACKGROUND
Section 30B(a)(3) provides for a credit determined under § 30B(d) for
certain new qualified hybrid motor vehicles. The new qualified hybrid motor
vehicle credit for a heavy-duty hybrid motor vehicle is determined under
§ 30B(d)(2)(B) and is an amount equal to the applicable percentage of the
qualified incremental hybrid cost of the vehicle. The qualified incremental hybrid
cost is the excess of the manufacturer’s suggested retail price for the qualified
vehicle over the manufacturer’s suggested retail price for a comparable vehicle.
However, the qualified incremental hybrid cost of a vehicle is limited depending
upon the gross vehicle weight rating of the vehicle. The applicable percentage
varies depending upon the increase in the city fuel economy of the qualified
vehicle relative to a comparable vehicle.
SECTION 3. SCOPE OF NOTICE.
.01 Vehicles Covered. This notice applies only to heavy-duty hybrid motor
vehicles. Guidance concerning the new qualified hybrid motor vehicle credit for
passenger automobiles and light trucks is provided in Notice 2006-9,
2006-6 I.R.B. 413.
.02 Rules Common to All Qualifying Vehicles. This notice does not
address a number of rules that are common to all motor vehicles that qualify for
credits under § 30B, including (1) rules under which lessors may claim the credits
allowable under § 30B, (2) the rule preventing the credits from being used to
reduce alternative minimum tax liability, and (3) rules relating to recapture of the
credit. Certain rules applicable to all motor vehicles that qualify for credits under

3
§ 30B are described in Fact Sheet 2007-9
(http://www.irs.ustreas.gov/newsroom/article/0,,id=165649,00.html
).
SECTION 4. MEANING OF TERMS.
The following definitions apply for purposes of this notice:
(1) In General. Terms used in this notice and not defined in this section
have the same meaning as when used in § 30B.
(2) Heavy-Duty Hybrid Motor Vehicle. The term
“heavy-duty hybrid motor
vehicle” means any hybrid motor vehicle that is not a passenger automobile or
light truck within the meaning of section 4(2) of Notice 2006-9. Thus, a hybrid
motor vehicle (including a hybrid motor vehicle that is a medium-duty passenger
vehicle, as defined in 40 C.F.R. § 600.002-08) that has a gross vehicle weight
rating of more than 8,500 pounds will be treated as a heavy-duty hybrid motor
vehicle for purposes of this notice.
(3) Manufacturer. (a) In general. The “vehicle manufacturer” or
“manufacturer” of a heavy-duty hybrid motor vehicle is--
(i) the person engaged in the manufacturing or assembling
of the completed heavy-duty hybrid motor vehicle
for introduction into commerce;
and
(ii) if applicable, any person (other than the person described
in section 4(3)(a)(i)) that installs the systems that convert a vehicle powered
solely by an internal combustion or heat engine using consumable fuel into the
completed heavy-duty hybrid motor vehicle.

4
(b) For purposes of this section 4(3)--
(i) a “completed heavy-duty hybrid motor vehicle” is a new
heavy-duty hybrid motor vehicle that is ready for use and requires no further
manufacturing or assembly operations; and
(ii) “introduction into commerce” occurs when a vehicle
manufacturer ships a completed motor vehicle from a facility of the manufacturer
to a distributor, retailer, or consumer.
(4) City Fuel Economy. (a) In general. The term “city fuel economy”
means the fuel economy measured in a manner that is substantially similar to the
manner in which city fuel economy is measured in accordance with procedures
under 40 C.F.R. Part 600, as in effect on August 8, 2005. A manufacturer may
develop and use for this purpose any procedures that the manufacturer
reasonably determines to be substantially similar to the procedures under 40
C.F.R. Part 600, as in effect on August 8, 2005. In addition, the Service will not
challenge a manufacturer’s determination of city fuel economy using any safe
harbor measurement method listed in section 4(4)(c) of this notice if that method
is consistently used to determine city fuel economy for both the qualified heavy-
duty hybrid motor vehicle and the comparable vehicle to which the qualified
vehicle’s fuel economy is compared in providing the certification under this
notice.
(b) Carry-over models. The city fuel economy determined under
section 4(4)(a) of this notice for a vehicle of a particular make, model, and model
year may be used as the city fuel economy for any carry-over model of that

5
vehicle. For this purpose, a vehicle is a carry-over model with respect to a
vehicle produced in an earlier model year if the vehicles are of the same make
and model and the design of the model has not changed since such earlier
model year.
(c) Safe harbor measurement methods. The safe harbor
measurement methods listed in this section 4(4)(c) are any of the following:
(i) In the case of heavy-duty hybrid motor vehicles that are
medium-duty passenger vehicles, as defined in 40 C.F.R. 600.002-08,
measurement in accordance with procedures under 40 C.F.R. Part 600, as in
effect on the date the manufacturer’s certification is provided.
(ii) In the case of heavy-duty hybrid motor vehicles that are
not medium-duty passenger vehicles, as defined in 40 C.F.R. 600.002-08,
measurement using the carbon balance method applied to emissions measured
using either the procedures in 40 C.F.R. Part 86, Subpart B and 40 C.F.R. §
86.1863-07 or the procedures in the California Interim Certification Procedures
for 2004 and Subsequent Model Hybrid-Electric Vehicles in the Urban Bus and
Heavy-Duty Vehicle Classes.
(5) Comparable Vehicle. (a) In general. The term "comparable vehicle"
means, for purposes of determining the qualified incremental hybrid cost and the
increase in city fuel economy of a qualified heavy-duty hybrid motor vehicle, any
vehicle that is powered solely by a gasoline or diesel internal combustion engine
and is comparable in weight, size, and use to the qualified vehicle. For this
purpose--

6
(i) a vehicle produced by the same manufacturer as the qualified
vehicle is comparable in use only if it is manufactured in the same model year as
the qualified vehicle; and
(ii) a vehicle produced by a person other than the manufacturer of
the qualified vehicle is comparable in use only if it is manufactured in the same
12-month period as the qualified vehicle.
(b) Manufacturer to choose among multiple comparable vehicles. If
more than one model of vehicle is comparable in weight, size, and use to the
qualified vehicle, the manufacturer of the qualified vehicle may choose a vehicle
of any model that is comparable in weight, size, or use and treat that vehicle as
the comparable vehicle for purposes of providing a certification under this notice.
(6) Model Year. The term “model year” means—
(a) the vehicle manufacturer's annual production period
(determined under regulations prescribed by the Administrator of the
Environmental Protection Agency for purposes of the administration of title II of
the Clean Air Act (42 U.S.C. 7521 et seq.)); or
(b) the calendar year in which the vehicle is manufactured, if the
vehicle manufacturer has no annual production period for that make and model
of vehicle.
(7) Total Traction Power. The term "total traction power" means the sum
of the peak power from the rechargeable energy storage system and the heat
engine peak power of the vehicle, except that if the storage system is the sole
means by which the vehicle can be driven, the total traction power is the peak

7
power of the storage system.

SECTION 5. MANUFACTURER’S CERTIFICATION
.01 When Certification Permitted. A vehicle manufacturer (or, in the case
of a foreign vehicle manufacturer, its domestic distributor) may certify to
purchasers that a heavy-duty hybrid motor vehicle of a particular make, model,
and model year meets all requirements (other than those listed in section 5.02 of
this notice) that must be satisfied to claim the new qualified hybrid motor vehicle
credit, and the amount of the credit allowable under § 30B(a)(3) and (d) with
respect to the vehicle, if the following requirements are met:
(1) The manufacturer (or, in the case of a foreign vehicle
manufacturer, its domestic distributor) has submitted to the Service, in
accordance with section 6 of this notice, a certification with respect to the vehicle
and the certification satisfies the requirements of section 5.03 of this notice; and
(2) The manufacturer (or, in the case of a foreign vehicle
manufacturer, its domestic distributor) has received an acknowledgment of the
certification from the Service.
.02 Purchaser’s Reliance. Except as provided in section 5.06 of this
notice, a purchaser of a heavy-duty hybrid motor vehicle may rely on the
manufacturer’s (or, in the case of a foreign vehicle manufacturer, its domestic
distributor’s) certification concerning the vehicle and the amount of the credit
allowable with respect to the vehicle (including in cases in which the certification
is received after the purchase of the vehicle). The purchaser may claim a credit
in the certified amount with respect to the vehicle if the following requirements

8
are satisfied:
(1) The vehicle is placed in service by the taxpayer after December
31, 2005, and is purchased on or before December 31, 2009.
(2) The original use of the vehicle commences with the taxpayer.
(3) The vehicle is acquired for use or lease by the taxpayer, and not
for resale.
(4) The vehicle is used predominantly in the United States.
.03 Content of Certification. The certification must contain the following
information:
(1) The name, address, and taxpayer identification number of the
certifying entity;
(2) The make, model, model year, and any other appropriate
identifiers of the motor vehicle;
(3) A statement that the vehicle is made by a manufacturer;
(4) The amount of the credit for the vehicle (showing computations);
(5) The manufacturer’s suggested retail price for the vehicle;
(6) The manufacturer’s suggested retail price for a comparable
vehicle;
(7) The make, model, and model year of a comparable vehicle;
(8) The gross vehicle weight rating of the vehicle;
(9) The city fuel economy of the vehicle and evidence that—
(a) the city fuel economy was measured in a manner that is
substantially similar to the manner in which city fuel economy is measured in

9
accordance with procedures under 40 C.F.R § 600 as in effect on August 5, 2005
(including a description of the procedures used to measure city fuel economy and
a description of the manufacturer’s basis for reasonably determining that those
procedures are substantially similar to the procedures under 40 C.F.R. § 600, as
in effect on August 5, 2005); or
(b) a safe harbor measurement method listed in section
4(4)(c) of this notice was consistently used to determine city fuel economy for
both the qualified heavy-duty hybrid motor vehicle and the comparable vehicle to
which the qualified vehicle’s fuel economy is compared in providing the
certification
(10) A statement that the motor vehicle draws propulsion energy
from onboard sources of stored energy that are both an internal combustion or
heat engine using consumable fuel, and a rechargeable energy storage system;
(11) Evidence that the maximum power available from the
rechargeable energy storage system during a standard 10 second pulse power
or equivalent test is—
(a) at least 10 percent of the vehicle’s total traction power, in
the case of a vehicle that has a gross vehicle weight rating of more than 8,500
pounds and not more than 14,000 pounds, and
(b) at least 15 percent of the vehicle’s total traction power, in
the case of a vehicle that has a gross vehicle weight rating of more than 14,000
pounds;
(12) The total traction power of the vehicle;

10
(13) A statement that the vehicle complies with the applicable
provisions of the Clean Air Act;
(14) A statement that the vehicle complies with the applicable air
quality provisions of state law of each state that has adopted the provisions
under a waiver under § 209(b) of the Clean Air Act or a list identifying each state
that has adopted applicable air quality provisions with which the vehicle does not
comply;
(15) A statement that the vehicle complies with the motor vehicle
safety provisions of 49 U.S.C. §§ 30101 through 30169;
(16) A copy of the certificate of conformity under the Clean Air Act
certifying the vehicle’s internal combustion or heat engine as meeting the
emission standards set in the regulations prescribed by the Administrator of the
Environmental Protection Agency for 2004 through 2007 model year diesel
heavy-duty engines or ottocycle heavy-duty engines, as applicable; and

(17) A declaration, applicable to the certification and any
accompanying documents, signed by a person currently authorized to bind the
manufacturer (or, in the case of a foreign vehicle manufacturer, its domestic
distributor) in these matters, in the following form:
“Under penalties of perjury, I declare that I have examined this
certification, including accompanying documents, and to the best of my
knowledge and belief, the facts presented in support of this certification are true,
correct, and complete.”
.04 Multiple manufacturers. If more than one person is treated as the

11
manufacturer of a vehicle under section 4(3) of this notice, the requirements of
section 5.03 of this notice are treated as satisfied if each item of information
described in section 5.03(2) through 5.03(16) is provided by one of the
manufacturers and each manufacturer providing such information also provides
the identifying information described in section 5.03(1) and the declaration
described in section 5.03(17).
.05 Acknowledgment of Certification. The Service will review the original
signed certification and issue an acknowledgment letter to the vehicle
manufacturer (or, in the case of a foreign vehicle manufacturer, its domestic
distributor) within 30 days of receipt of the request for certification. This
acknowledgment letter will state whether purchasers may rely on the certification.
.06 Effect of Erroneous Certification.
(1) Erroneous Certification. The acknowledgment that the Service
provides for a certification is not a determination that a vehicle qualifies for the
credit, or that the amount of the credit is correct. The Service may, upon
examination (and after any appropriate consultation with the Department of
Transportation or the Environmental Protection Agency), determine that the
vehicle is not a new qualified heavy-duty hybrid motor vehicle or that the amount
of the credit determined by the manufacturer (or, in the case of a foreign vehicle
manufacturer, its domestic distributor) to be allowable with respect to the vehicle
is incorrect. In either event, the manufacturer’s (or, in the case of a foreign
vehicle manufacturer, its domestic distributor’s) right to provide a certification to
future purchasers of the heavy-duty hybrid motor vehicles will be withdrawn, and

12
purchasers who acquire a vehicle after the date on which the Service publishes
an announcement of the withdrawal may not rely on the certification. Purchasers
may continue to rely on the certification for vehicles they acquired on or before
the date on which the announcement of the withdrawal is published (including in
cases in which the vehicle is not placed in service and the credit is not claimed
until after that date), and the Service will not attempt to collect any
understatement of tax liability attributable to such reliance. Manufacturers (or, in
the case of foreign vehicle manufacturers, their domestic distributors) are
reminded that an erroneous certification may result in the imposition of penalties:
(a) under § 7206 for fraud and making false statements; and
(b) under § 6701 for aiding and abetting an understatement
of tax liability in the amount of $1,000 ($10,000 in the case of understatements
by corporations) per return on which a credit is claimed in reliance on the
certification).
SECTION 6. TIME AND ADDRESS FOR FILING CERTIFICATION
.01 Time for Filing Certification. In order for a certification under section 5
of this notice to be effective for new qualified heavy-duty hybrid motor vehicles
placed in service during a calendar year beginning after December 31, 2006, the
certification must be received by the Service not later than December 31
st
of that
calendar year. For new qualified heavy-duty hybrid motor vehicles placed in
service during 2006, the certification must be received by the Service not later
than December 31, 2007.

13

.02 Address for Filing. Certifications under section 5 of this notice must be
sent to:
Internal Revenue Service,
Industry Director, Large and Mid-Size Business, Heavy
Manufacturing and Transportation,
Metro Park Office Complex - LMSB,
111 Wood Avenue, South,
Iselin, New Jersey 08830.
SECTION 7. PAPERWORK REDUCTION ACT
The collection of information contained in this notice has been reviewed
and approved by the Office of Management and Budget in accordance with the
Paperwork Reduction Act (44 U.S.C. 3507) under control number 1545-2060.
An agency may not conduct or sponsor, and a person is not required to
respond to, a collection of information unless the collection of information
displays a valid OMB control number.
The collections of information in this notice are in section 5. This
information is required to be collected and retained in order to ensure that
vehicles meet the requirements for the new qualified hybrid motor vehicle credit
under § 30B(a)(3) and (d). This information will be used to determine whether
the vehicle for which the credit is claimed by a taxpayer is property that qualifies
for the credit. The collection of information is required to obtain a benefit. The

14
likely respondents are corporations and partnerships.
The estimated total annual reporting burden is 240 hours.
The estimated annual burden per respondent varies from 35 hours to 45
hours, depending on individual circumstances, with an estimated average burden
of 40 hours to complete the certification required under this notice. The
estimated number of respondents is 6.
The estimated annual frequency of responses is on occasion.
Books or records relating to a collection of information must be retained as
long as their contents may become material in the administration of any internal
revenue law. Generally, tax returns and tax return information are confidential,
as required by 26 U.S.C. 6103.
SECTION 10. DRAFTING INFORMATION

The principal author of this notice is Nicole R. Cimino of the Office of
Associate Chief Counsel (Passthroughs and Special Industries). For further
information regarding this notice, contact Ms. Cimino at (202) 622-3120 (not a
toll-free call).