(Art. 13)
1 The internal production control is the conformity assessment procedure by which the manufacturer fulfils the obligations in points 2, 3 and 4 of this Annex and ensures and declares on its own sole responsibility that the radio equipment concerned satisfies the requirements of this Ordinance that apply to it. 2 Technical documentation The manufacturer shall draw up the technical documentation in accordance with Article 14. 3 Manufacture 3.1 The manufacturer shall take all measures necessary so that the manufacturing process and its monitoring ensure the compliance of the manufactured radio equipment with the technical documentation referred to in point 2 of this Annex and with the essential requirements set out in this agreement. 3.2 The manufacturer shall take appropriate account of any changes in the design or characteristics of the radio equipment and changes in the harmonised standards or in other technical specifications by reference to which conformity of radio equipment is declared. 4 Conformity marking and declaration of conformity 4.1 The manufacturer shall affix the conformity marking referred to in Article 18 to each individual item of radio equipment that satisfies the requirements applicable under this Ordinance. 4.2 The manufacturer shall issue a written declaration of conformity in accordance with Annex 5 for each radio equipment model. 5 Authorised representative 5.1 The manufacturer’s obligations mentioned in point 4 may be fulfilled by its authorised representative on the manufacturer’s behalf and under its responsibility provided such obligations are specified in a mandate. 5.2 The design and manufacture of radio equipment and drawing up the technical documentation may not be delegated to the authorised representative.
0 commentaries